Journal Publications

Peer Reviewed Journal Publications 

  1. Krishna M. Sankar, Preet M. Singh, Effect of Li Metal Addition on Corrosion Control of Hastelloy N and Stainless Steel 316H in Molten LiF-NaF-KF, Nucl. Mater, 555, 2021 
  2. Kasey Hanson, Krishna Moorthi Sankar, Philippe F Weck, Jacob K Startt, Remi Dingreville, Chaitanya S Deo, Joshua D Sugar, Preet M Singh, Effect of Excess Mg to Control Corrosion in Molten MgCl2 and KCl Eutectic Salt Mixture, Corrosion Science, 109914, 2021.
  3. Kevin R Chasse, Rupesh Rajendran, Crosby T Owens, Preet M Singh, Stress Corrosion Cracking Susceptibility of Additively Manufactured Aluminum Alloy 7050 Produced by Selective Laser Melting in Chloride Environments, Journal of Materials Engineering and Performance, Vol 30, no. 9, pp 7046-7056, 2021
  4. Ankit K. Singh, Katarina Adstedt, Tianxin Miao, Julie Champion, Preet M. Singh Samuel Graham, Stability of plasma-enhanced atomic layer deposited barrier films in biological solutions, Engineering Reports. 2020; e12303. https://doi.org/10.1002/eng2.12303.
  5.  Kevin J Chan, Preet M Singh, Corrosion behavior of pre-carburized Hastelloy N, Haynes 244, Haynes 230, and Incoloy 800H in molten FLiNaK, Nuclear Technology, 206 (11), pp1751-1768, 2020
  6. Kevin J Chan, Preet M Singh, Carburization of metals by a chemical mechanism of carbon transport through molten fluoride salts, Journal of Nuclear Materials, 539, p 152307, 2020
  7.  Liang He, Yushu Wang, Preet M Singh, Role of Ferrite and Austenite Phases on the Overall Pitting Behavior of Lean Duplex Stainless Steels in Thiosulfate-Containing Environments, Journal of The Electrochemical Society, Vol. 167, 4, p 041502, 2020
  8.  Wu, Gaoxiang; Singh, Preet M., Effect of Plastic Deformation on Pitting Mechanism of SS304, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,Ahead of Print, 2019
  9. Thomas Winter, Richard W. Neu, Preet M. Singh, Lynne E. Kolaya, Daniel Vizoso, Chaitanya S. Deo; Coefficient of friction evolution with temperature under fretting wear for FeCrAl fuel cladding candidate, Journal of Nuclear Materials, Vol. 520, pp140-151, 2019.
  10. He, Liang; Wirian, Lovelyn; Singh, Preet M., Effects of Isothermal Aging on the Microstructure Evolution and Pitting Corrosion Resistance of Lean Duplex Stainless Steel UNS S3200. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,50(5), 2103-2113, 2019
  11. Robert D Moser, Preet M Singh, Lawrence F Kahn, Kimberly E Kurtis, David González Niño, Zackery B McClelland, Crevice corrosion and environmentally assisted cracking of high-strength duplex stainless steels in simulated concrete pore solutions, Construction and Building Materials, Vol 203, PP 366-376, 2019.
  12. Z Zhang, ZF Hu, P M Singh, X Li, S Xiong, XX Fang, Microstructure Evolution and Stress Corrosion Cracking Susceptibility of 12Cr Martensitic Steel Upon Long-Term Service in Power Plants, Journal of Materials Engineering and Performance, Vol 28, No. 2, pp 995-1006, 2019.
  13. BA Baykal, PM Singh, Effect of Viscosity on the Erosion-Corrosion of Steels Exposed to White Liquor Including Abrasives for Extended Time Periods, Materials Performance and Characterization 8 (1), 92-106, 2019
  14. G Wu, PM Singh, Effect of Elastic Stresses on Pitting Behavior of Stainless Steel 304, Journal of The Electrochemical Society 166 (8), C209-C216, 2019
  15. Preet M Singh, Kevin J Chan, Chaitanya S Deo, Vinay Deodeshmukh, James R Keiser, Weiju Ren, TL Sham, Dane F Wilson, Graydon Yoder, Jinsuo Zhang, Phenomena Identification and Ranking Table (PIRT) study for metallic structural materials for advanced High-Temperature reactor, Annals of Nuclear Energy, Vol. 123, pp-222-229, 2019.
  16. Ankit K Singh, Katarina Adstedt, Billyde Brown, Preet M Singh, Samuel Graham, Development of ALD Coatings for Harsh Environment Applications, ACS Applied Materials & Interfaces, American Chemical Society, 1 (7), 7498-7509, 2018.
  17. Kevin J Chan, Rebecca J Ambrecht, Julie M Luong, Won Tae Choi, Preet M Singh, Carburization effects on the corrosion of Cr, Fe, Ni, W, and Mo in fluoride-salt cooled high temperature reactor (FHR) coolant, Annals of Nuclear Energy, Vol. 120, pp279-285, 2018.
  18. J Zhang, CW Forsberg, MF Simpson, S Guo, ST Lam, RO Scarlat, F Carotti, K Chan, Preet M Singh, William Doniger, K Sridharan, JR Keiser, Redox Potential Control in Molten Salt Systems for corrosion Mitigation, Corrosion Science, 144, pp44-53, 2018.
  19. Thomas C Winter, Richard W Neu, Preet M Singh, Lynne E Kolaya, Chaitanya S Deo, Fretting wear comparison of cladding materials for reactor fuel cladding application, Journal of Nuclear Materials, 508, pp505-515, 2018.
  20. Zhang, Z.F. Hu, L.F. Zhang, K. Chen, P.M. Singh, Effect of temperature and dissolved oxygen on stress corrosion cracking behavior of P92 ferritic-martensitic steel in supercritical water environment, Journal of Nuclear Materials, 498, pp 89-102, 2018.
  21. Jang, W. T. Choi, C. Johnson, A. Garcia, P. M. Singh, V. Breedveld, D. W. Hess, and J. A. Champion, Inhibition of bacterial adhesion on nano-textured stainless steel 316L by electrochemical etching, ACS Biomaterials Science & Engineering, vol. 4(1), pp90-97, 2018.
  22. Yinan Jiao, Jamshad Mahmood, Wenyue Zheng, Preet Singh, Joey Kish, Effect of Thermal Ageing on the Intergranular Stress Corrosion Cracking Susceptibility of Type 310S Stainless Steel, Corrosion, Vol. 74, pp430-443, 2017.
  23. T. Choi, K. Oh, P. M. Singh, V. Breedveld, and D. W. Hess, Hydrophobicity and improved localized corrosion resistance of grain boundary etched stainless steel in chloride-containing environment, Journal of The Electrochemical Society, 164, pp C61-C65, 2017.
  24. Doerr, Christoph; Lakocy, Alexander; Kim, Jin-Yeon; Singh, Preet M.; Wall, James J.; Qu, Jianmin; Jacobs, Laurence J., Evaluation of the heat-​affected zone (HAZ) of a weld joint using nonlinear Rayleigh waves, Materials Letters, 190, pp221-224. 2017.
  25. Doerr, Christoph; Kim, Jin-Yeon; Singh, Preet; Wall, James J.; Jacobs, Laurence J.; Evaluation of sensitization in stainless steel 304 and 304L using nonlinear Rayleigh waves, NDT&E International, (88), pp17-23, 2017.
  26. Choi, W. T.; Oh, K.; Singh, P. M.; Breedveld, V.; Hess, D. W., Hydrophobicity and Improved Localized Corrosion Resistance of Grain Boundary Etched Stainless Steel in Chloride-containing Environment. Electrochem. Soc, 164 (2), C61-C65. 2017.
  27. Choi, W. T.; Oh, K.; Singh, P. M.; Breedveld, V.; Hess, D. W., Wettability control of stainless steel surfaces via evolution of intrinsic grain structures. Journal of Materials Science, vol. 5, (11), pp5196-5206, 2017
  28. Winter, Thomas; Huggins, James; Neu, Richard; Singh, Preet; Deo, Chaitanya S., Fretting Wear Behavior of APMT Steel at 350°C for Reactor Fuel Cladding Application, MRS Advances, 1(35), 2495-2500, 2016.
  29. Oh, Kkoch Nim; Eom, Kwang Sup; Liang, Zhiyuan; Singh, Preet M., High Temperature Oxidation Behavior of APM and APMT under Dry Air​/Steam Condition, MRS Advances, 1(35), 2471-2476, 2016.
  30. Wang, Yushu; Wu, Gaoxiang; He, Liang; Singh Preet. M. Effect of Thiosulfate on Metastable Pitting of 304L and S32101 in Chloride- and Thiosulfate-Containing Environment, Corrosion, Volume: 72,   Issue: 5   pp 628-635, 2016.
  31. Moser, Robert D.; Kurtis, Kimberly E.; Singh, Preet M.; Kahn Lawrence F, Effect of sulfates on passivation in alkaline environments, Proceedings of the Institute of Civil Engineers-Construction Materials, Volume: 169, Issue: 1   Pages: 39-43,  2016.
  32. Amaro, Robert L.; Antolovich, Stephen D.; Neu, Richard W.; Singh Preet M., High temperature oxidation and gamma ‘ depletion in the single-crystal superalloy PWA 1484, Materials at High Temperatures, Volume: 33 Issue: 4-5, Pages: 476-488,  2016.
  33. Zhang, Z.; Singh, P. M.; Hu, Z. F. The Corrosion Behavior of 9Cr Ferritic-Martensitic Heat-Resistant Steel in Water and Chloride Environment. Journal of Engineering Materials and Technology. Volume 137, Issue: 3,
  34. Wang, Yushu; Singh Preet M; Corrosion Behavior of Austenitic and Duplex Stainless Steels in Thiosulfae- and Chloride-Containing Environments, Vol 71, No. 8, 2015.
  35. Wang, Y. S.; Singh, P. M., Corrosion and repassivation behavior of stainless steels in chloride and thiosulfate containing environments, Corrosion Science and Technology , 14(4), pp184-189.
  36. Alkaim, Ayad Fadhil; Sadik, Zainab; Mahdi, Dunia Kamil; Alshrefi, Saif Mohammed; Al-Sammarraie, Abdulkareem Mohammed; Alamgir, Faisal Muhammad; Singh, Preet Mohinder; Aljeboree, Aseel Mushtaq, Preparation, structure and adsorption properties of synthesized multiwall carbon nanotubes for highly effective removal of maxilon blue dye, Published online- Korean Journal of Chemical Engineering,2015.
  37. Liang, Zhiyuan; Singh, Preet M.; Zhao, Qinxin; Wang, Yushu, High Temperature Oxidation of Newly Developed Alloy 282 in the Flowing-​Air and Steam Condition at 900-​1100 °C, Volume: 84   No. 3-4   pp: 291-305, Oxidation of Metals,2015.
  38. Joseph F. Meyer, Preet M. Singh, Recovery Boiler Superheater Corrosion – The Solubility of Protective Metal Oxides in Molten Salts, Journal of Science and Technology for Forest Products and Processes, Vol 4. No. 4, pp56-64. 2015.
  39. Zhiyuan Liang, Qinxin Zhao,Preet M. Singh, Yungang Wang, Yuxin Li, Field studies of steam oxidation behavior of austenitic heat-resistant steel 10Cr18Ni9Cu3NbN, Engineering Failure Analysis, 53, 132-137, 2015.
  40. Koushik Ramachandran, Timothy L. Pruyn, Timothy Huang, Yushu Wang, Preet Singh, Jud Ready, Rosario A. Gerhardt, Venky Sundaram, Rao Tummala, Investigation of copper-plated-through-holes in glass fiber reinforced epoxy substrates using AC impedance spectroscopy, Journal of Materials Science: Materials in Electronics, 26(4), 2563-2570, 2015.
  41. Moser Robert D., Singh Preet M., Kahn Lawrence F. Kurtis Kimberly E. Crevice Corrosion And Environmentally Assisted Cracking of UNS S32205 and S32304 High-Strength Duplex Stainless Steels in Simulated Concrete Pore Solutions, Submitted to Corrosion. 2014.
  42. Chiad Bahaa’ To’ma; Sadik, Zainab S.; Mahdi, Dunia K.; Alshrefi, Saif M.; Al-Sammarraie, Abdulkareem; Alamgir, Faisal; Singh, Preet; Alkaim, Ayad F Synthesis of carbon nano-​structures by low-​temperature Hydrothermal technique, Journal of Applicable Chemistry, Vol. 3(4), pp 1552-1559, 2014.
  43. Moser Robert D., Singh Preet M., Kahn Lawrence F. Kurtis Kimberly E., Recent Developments in High-Strength Stainless Steels for Corrosion Mitigation in Prestressed Concrete, Advances in Civil Engineering Materials, 3(1), 509-525, 2014.
  44. Wekesa M., Uddin M. J., Conde P. Singh P. M. Acid cleaning of corrosive Kraft digesters and evaporators, Universal Journal of Chemistry, Vol 2(1), pp 6-10, 2014.
  45. Zeitvogel, Daniel T.; Matlack, Kathryn H.; Kim, Jin-Yeon; Jacobs, Laurence J.; Singh, Preet M.; Qu, Jianmin, Characterization of damage due to stress corrosion cracking in carbon steel using nonlinear surface acoustic waves, NDT&E International, vol. 62, pp144-152, 2014.
  46. Brett Holland, Kimberly E. Kurtis, Robert D. Moser, Lawrence F. Kahn, Fred Aguayo, and Preet M. Singh, Multiple Deterioration Mechanisms in Coastal Concrete Piles – A forensic case study. Concrete International, pp 1-8, July, 2014
  47. Chasse, Kevin R.; Singh, Preet M, Corrosion Study of Super Ferritic Stainless Steel UNS S44660 (26Cr-​3Ni-​3Mo) and Several Other Stainless Steel Grades (UNS S31603, S32101, and S32205) in Caustic Solution Containing Sodium Sulfide Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,44(11), 5039-5053. 2013
  48.  D. Moser, K. E. Kurtis, P. M. Singh L. F. Kahn, Effect of Sulfates on the Passivation Behavior of Carbon and Stainless Steels in Simulated Concrete Pore Solutions, Submitted to Cement and Concrete Composites Journal. 2013.
  49. Lindsey R. Goodman, Preet. M. Singh, Repassivation behavior of X65 pipeline steel in fuel grade ethanol and its implications for the stress corrosion cracking mechanism, Corrosion Science, 65, 238-248, 2012.
  50. K.R. Chasse, S. Raji, P.M. Singh Effect of chloride ions on corrosion and stress corrosion cracking of duplex stainless steels in hot alkaline-sulfide solutions, Corrosion, 68(10), 932-949, 2012.
  51. K.R. Chasse and P.M. Singh, Effect of Microstructural Anisotropy on Stress Corrosion Cracking of Hot Rolled Duplex Stainless Steel, Corrosion Engineering, Science and Technology, 47(3), 170-176, 2012.
  52. R. D. Moser, L. F. Kahn, K. E. Kurtis, P. M. Singh, High-Strength Stainless Steels for Corrosion Mitigation in Prestressed Concrete: State of the Art, ACI Journal, 2011.
  53. R. D. Moser, Preet M. Singh, Lawrence F. Kahn, Kimberly E. Kurtis, Chloride-induced corrosion resistance of high-strength stainless steels in simulated alkaline and carbonated concrete pore solutions. Corrosion Science, 57, pp 241-253, 2012.
  54. R. D. Moser, K. E. Kurtis, P. M. Singh L. F. Kahn, Influence of Sulfates on the Passivation Behavior of Carbon and Stainless Steels in Simulated Concrete Pore Solutions, Submitted to Cement and Concrete Composites Journal, 2012.
  55.  Huang, Fang; Singh, Preet M.; Ragauskas, Arthur J., Characterization of Milled Wood Lignin (MWL) in Loblolly Pine Stem Wood, Residue, and Bark, Journal of Agricultural and Food Chemistry, 59(24), 12910-12916. 2011.
  56. Robert D. Moser, Preet M. Singh, Lawrence F. Kahn, Kimberly E. Kurtis, Chloride-induced corrosion of prestressing steels considering crevice effects and surface imperfections, corrosion, Corrosion, Vol. 67, No. 6, p065001.
  57. Kevin R. Chasse and Preet M. Singh, Hydrogen Embrittlement of a Duplex Stainless Steel in Alkaline Sulfide Solution, Corrosion Journal, Vol. 67, No. 1, pp 015002-1-12.
  58. Xiaoyuan Lou, Preet M. Singh. Cathodic activities of oxygen and hydrogen on carbon steel in simulated fuel-grade ethanol. Electrochimica Acta, 56(5), 2312-2320.
  59. Xiaoyuan Lou, Preet M. Singh. Phase angle analysis for stress corrosion cracking of carbon steel in fuel-grade ethanol: Experiments and simulation. Electrochimica Acta, 56(4), 1835-1847,
  60. Ananya Bhattacharya,; Preet M Singh, Electrochemical behaviour of duplex stainless steels in caustic environment. Corrosion Science, 53(1), 71-81.
  61. Xiaoyuan Lou, Preet M. Singh. Role of water, acetic acid and chloride on corrosion and pitting behaviour of carbon steel in fuel-grade ethanol. Corrosion Science, 52(7), 2010.
  62. Xiaoyuan Lou, Di Yang, Preet M. Singh, Film Breakdown and Anodic Dissolution during Stress Corrosion Cracking of Carbon Steel in Bioethanol, Journal of The Electrochemical Society, Vol. 157, No.2, C86-C94,
  63. Xiaoyuan Lou, Di Yang, Preet M. Singh, Effect of Etahnol Chemistry on Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol, Corrosion, Vol. 65, No. 12,
  64. Preet M. Singh, Vikas R. Behrani, Jamshad Mahmood, Corrosion of carbon steel tubes in the mid-furnace of kraft recovery boilers – environment characterization.  Tappi Journal, 8(4), 23-29. 2009.
  65. Ananya Bhattacharya, Preet. M. Singh,   Effect of Heat Treatment on Corrosion and Stress Corrosion Cracking of S32205 Duplex Stainless Steel in Caustic Solution.    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40A(6),  1388-1399.
  66. L. Asher, P. M. Singh, P. M.  Role of stress in transgranular stress corrosion cracking of transmission pipelines in near-neutral pH environments.  Corrosion, 65(2), 79-87, 2009.
  67. Omar Hatamleh, Preet M. Singh, Hamid Garmestani.  Corrosion susceptibility of peened friction stir welded 7075 aluminum alloy joints.    Corrosion Science, 51(1),  135-143.
  68. Omar Hatamleh, Preet M. Singh, Hamid Garmestani. Stress Corrosion Cracking Behavior of Peened Friction Stir Welded 2195 Aluminum Alloy Joints. Journal of Materials Engineering and Performance 18(4),  406-413. 2009
  69. Vikas R. Behrani and Preet M. Singh, Fluctuating Sulfidizing-Oxidizing Environments and its Effect of Stability of Protective Scales, Corrosion, 883-890, 64 (12), 2008.
  70. Ananya Bhattacharya and Preet M. Singh, Effect of heat treatment on corrosion and Stress Corrosion Cracking of 2205 and 2101 duplex stainless steels in caustic solutions, Corrosion. 64, (6), pp532-540, 2008.
  71. Yunqiao Pu, Dongcheng Zhang, Preet M. Singh, and Arthur J. Ragauskas, The New Forestry BioFuels Sector, Biofuels, Bioproducts & Biorefining 2, No. 1,  58-73,
  72. Ananya Bhattacharya and Preet M. Singh, Stress Corrosion Cracking of Welded 2205 Duplex Stainless Steel in Sulfide-Containing Caustic Solution, Journal of Failure Analysis and Prevention, Vol. 7, No. 5, pp 371-377, 2007.
  73. Dong Ho Kim, Yunqiao Pu, Richard P. Chandra, Thomas J. Dyer, Arthur J. Ragauskas, Preet. M. Singh, A Novel Method for Enhanced Recovery of Lignin from Aqueous Process Streams, Journal of Wood Chemistry and Technology. 27:3, 219-224, 2007.
  74. Preet M. Singh, Jamshad Mahmood, Stress Assisted Corrosion of Waterwall Tubes in Recovery Boiler Tubes: Failure Analysis, Journal of Failure Analysis and Prevention, Vol. 7, No. 5, pp 361-370, 2007.
  75. Stefanie L. Asher, Brian N. Leis, Jeffery A. Colwell, Preet M. Singh, Investigating a Mechanism for Transgranular Stress Corrosion Cracking on Buried Pipelines in Near-Neutral pH Environments, Corrosion, Vol. 63, (10), pp 932-939, 2007.
  76. Dong Yang, Preet M. Singh, Richard W. Neu, Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes, Journal of Engineering Materials and Technology, 129(4), pp 559-566, 2007.
  77. Preet M. Singh, Adolfo Anaya, Effect of Wood Species on Corrosion Behavior of Carbon Steel and Stainless Steels in Black Liquors, Corrosion Science, 49, No.2, pp 497-509,
  78. Ian Harrison, Thomas R. Kurfess, Edwards J. Oles, Preet M. Singh, Inspection of White Layer in Hard Turned Components Using Electrochemical Methods, Journal of Manufacturing Science and Engineering, 129, No. 2, pp 447-452, April 2007.
  79. Trexler, T.H. Sanders, P. M. Singh, Automation of a McBain-Bakr Type Thermogravimetric Analyzer (TGA), Using a Digital Image Correlation Technique. Review of Scientific Instruments, Vol. 77, No. 2, pp 025103/1-025103/4, Feb. 2006.
  80. Patrick E. Hazlewood, Preet M. Singh and Jeffery S. Hsieh, Corrosion Prediction for Carbon Steel in Sulfide Containing Caustic Solutions. & Engr. Chem. Res., 45, No.23, pp 7789-7794, 2006.
  81. Patrick E. Hazlewood, Preet M. Singh and Jeffery S. Hsieh, The Role of Wood Extractives in Black Liquor Corrosivity, Corrosion, 62, No.10, pp 911-917, Oct. 2006.
  82. Patrick E. Hazlewood, Preet M. Singh and Jeffery S. Hsieh, Effect of Black Liquor Oxidation on the Stress Corrosion Cracking Susceptibility of Selected Materials, Corrosion, Vol. 62, No. 9, pp 765-772, Sept. 2006.
  83. Preet M. Singh, Jorge J. Perdomo, Jamshad Mahmood, Pablo Conde, Stress Assisted Corrosion Simulation in Laboratory. Power Plant Chemistry, Vol. 7, pp 155-161, March 2005.
  84. Jorge J. Perdomo and Preet M. Singh, Environmentally Assisted Cracking of a Paper Machine Duplex Stainless Steel Suction Roll Material, Journal of Failure Analysis and Prevention, Vol. 4(2), pp 57-62, April 2004.
  85. Preet M. Singh, Jorge J. Perdomo, J. Mahmood, Julian Oteng, Stress Corrosion Cracking and Corrosion Fatigue of Duplex Stainless Steels in White Water Environments, Corrosion, Vol. 60, No. 9, Sept. 2004.
  86. Gustaf Bäck and Preet M. Singh, Susceptibility of Stainless Steel Alloys to Crevice Corrosion in Chlorine Dioxide Bleach Plants, Corrosion Science, 46(9), 2159-2182, Sept.
  87. Preet M. Singh and Safaa J. Al-Hassan, Corrosion in Lower Furnace of Kraft Recovery Boilers-In-situ Characterization of Corrosive Environments, TAPPI Journal. Vol. 87, No. 2,
  88. Preet M. Singh, O. Ige, Jamshad Mahmood, Stress corrosion cracking of 304L stainless steel in sodium sulfide containing caustic solutions, Corrosion, Vol. 59, No. 10, pp 843-850, Oct. 2003.
  89. Camille Y. Jones, Gang Chen, Sheng Dai and Preet M. Singh, Solubility in the NaOH-Na2CO3-Na2SO4-Na2SO3-Na2S2O3-Na2S-H2O System, a Simulated Black Liquor Recovery Boiler Smelt, & Engr. Chem. Res. 42(18), 4228-4233, 2003.
  90. Jorge J. Perdomo and Preet M. Singh, Electrochemical Noise (ECN) Measurements as a Corrosion Monitoring Tool. Corrosion Reviews, Vol. 20, No. 5, pp 360-378, 2002.
  91. Jorge J. Perdomo and Preet M. Singh, Corrosion Fatigue of Heat Treated Duplex Stainless Steels in Paper Mill White Waters. Corrosion Reviews, Vol. 20, No. 4, pp 295-316, 2002.
  92. R. Keiser, D. L. Singbeil, G. B. Sarma, K. A. Choudhury, P. M. Singh, C. R. Hubbard, R. W. Swindeman, T. M. Ely, J. R. Kish, E. A. Kenik, P. J. Maziasz, and S. E. Bailey, Comparison of cracking in recovery boiler composite floor and primary air port tubes, TAPPI Journal, Vol. 85, No.2, February 2002.
  93. Keiser, J. R., Sarma, G. B., Wang, S-L., Hubbard, C.R., Swindeman, R.W., Singbeil, D. L., Singh, P. M. Why Do Kraft Recovery Boiler Composite Floor Tubes Crack? TAPPI Journal, Vol. 84, p 48, August 2001.
  94. Greg Fonder, Safaa Al-Hassan, and Preet M. Singh, Corrosivity Monitoring Database for Kraft Recovery Boilers, PaperAge, pp 34-37, October 2000.
  95. Estes, M. Marek, P. M. Singh, A. Rudie, J. Colwell, Corrosion of Composite Tube Air-Ports in Kraft Recovery Boiler: Cr2O3, Fe2O3, NiO Solubility in Molten Hydroxide, P&P Canada, 100:12, pp106-109, 1999.
  96. Al-Hassan, G. J. Fonder, P. M. Singh, The Effect of Temperature Excursion on Sulfidation of Carbon Steel in 1% H2S Environment, P&P Canada, 100:10, 1999.
  97. M. Singh and J. J. Lewandowski, Stress Corrosion Cracking of Discontinuously Reinforced Aluminum (DRA) 2xxx Alloys during Slow Strain Rate Testing, J. Mat. Sci. Letters, Vol. 15, pp 490-493, 1996.
  98. M. Singh and J. J. Lewandowski, Effects of Heat Treatment on Stress Corrosion Cracking of Discontinuously Reinforced Aluminum (DRA) 7xxx Alloys during Slow Strain Rate Testing, Scripta Metall et Mat., Vol. 33, No. 9, pp 1393-1399, 1995.
  99. M. Singh and J. J. Lewandowski, The Effects of Reinforcement Additions and Heat Treatment on the Evolution of Poisson Ratio during Straining of Discontinuous Reinforcement Aluminum Alloys, Metall. Trans A. Vol. 26A, pp 2911-2921, Nov. 1995.
  100. M. Osman, P. M. Singh, J. J. Lewandowski, Crack Bridging in a Laminated Metal Matrix Composite, Scripta Metall et Mat., Vol. 31, No. 5, pp 607-612, 1994.
  101. M. Singh, J. J. Lewandowski, Poisson Ratio Measurements for an Al-Based Metal Matrix Composite during Elastic and Plastic Deformation, Scripta Metall et Mat., Vol. 29, pp 199-204, July 1993.
  102. M. Singh, J. J. Lewandowski, Effects of Heat Treatment and Reinforcement Size on Reinforcement Fracture during Tension Testing of a SiCp Discontinuously Reinforced Aluminum Alloy, Metall. Trans A. Vol. 24A, pp 2531-2543, Nov. 1993.
  103. M. Singh, J. T. Evans, N. J. H. Holroyd, Strain Concentration at Grain Boundaries in Al-Mg-Si Alloys, Material Sc. and Engg., Vol. A 158, pp 1-8, 1992.
  104. D. Rigney, P. M. Singh, J. J. Lewandowski, Environmental Effects on Ductile-Phase Toughening in Nb5Si3-Nb Composites, J.O.M., Vol. 44, pp 36-41, Aug. 1992.
  105. Congleton, B. Hemsworth, R. N. Parkins and P. M. Singh, Effect of heat treatments on the stress corrosion cracking of alloy 600 in high temperature waters, Nuclear Engineering and Design, Vol. 132, pp 119-132, 1991.
  106. N. Parkins and P. M. Singh, Stress Corrosion Crack Coalescence. Corrosion, Vol. 46, p 485, June 1990.
  107. M. Singh and S. N. Malhotra, Stress Corrosion Cracking of Austenitic Stainless Steels in Polythionic Acids, Corrosion, Vol. 43, p 26, January 1987